WEKO3
アイテム
ハイブリッドシュリンクフィッタを用いたセラミックスと金属の締りばめ（接合強度の測定）
http://hdl.handle.net/10191/5796
http://hdl.handle.net/10191/5796d626a1f3-4ef6-4b9a-b249-467702e4c25b
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
9_0094.pdf (587.5 kB)
|
|
| Item type | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2008-04-08 | |||||
| タイトル | ||||||
| タイトル | ハイブリッドシュリンクフィッタを用いたセラミックスと金属の締りばめ（接合強度の測定） | |||||
| 言語 | ||||||
| 言語 | jpn | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Fixing Element | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Ceramic | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Shrink Fit | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Shrink Fitter | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Fusible Alloy | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Elevated Temperature | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Coefficient of Thermal Expansion | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Slit | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Hybrid Shrink Fitter | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | journal article | |||||
| その他のタイトル | ||||||
| その他のタイトル | Shrink Fit between Ceramic and Metal with the Use of a Hybrid Shrink Fitter : Measurements of Fitting Strengths | |||||
| 著者 |
新田, 勇
× 新田, 勇× 草間, 圭一× 原, 利昭 |
|||||
| 著者別名 | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 58 | |||||
| 姓名 | Nitta, Isami | |||||
| 著者別名 | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 45968 | |||||
| 姓名 | Kusama, Keiichi | |||||
| 著者別名 | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 45969 | |||||
| 姓名 | Hara, Toshiaki | |||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | The shrink fitter improves the fitting strength of the shrink-fitted assembly between a ceramic shaft and a metal ring. For a thinner shrink fitter in the radial direction, a material which has a coefficient of thermal expansion as high as possible and an appropriate mechanical strength at the elevated temperature is needed. In this paper, a new type of shrink fitter, "a hybrid shrink fitter", containing liquid such as a fusible alloy, has been proposed. The specimen matcrials are Al_2O_3 and Si_3N_4 for the shafts, SUS304 for casings of the shrink fitter and SUS403 for the metal rings. Fitting strengths were measured at a temperature range of room temperature up to 600℃. The fitting strengths decreased with temperature up to 200℃ or 300℃ and increased at higher temperatures. It was found that the hybrid shrink fitter had a higher apparent coefficient of thermal expansion than the monolithic shrink fitter. The effect of the number of slits on the fitting strength at elevated temperature was also studied. The slit was essential in improving the fitting strength. The number of slits did not affect the fitting strength-temperature relationship if the number was 2 or more. The longevity of the hybrid shrink fitter was less than that of the monolithic shrink fitter. The reasons for the shorter life of the hybrid shrink fitter were discussed. | |||||
| 書誌情報 |
日本機械学会論文集. C編 en : 日本機械学会論文集. C編 巻 58, 号 555, p. 3326-3333, 発行日 1992-11 |
|||||
| 出版者 | ||||||
| 出版者 | 日本機械学会 | |||||
| ISSN | ||||||
| 収録物識別子タイプ | ISSN | |||||
| 収録物識別子 | 03875024 | |||||
| 書誌レコードID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AN00187463 | |||||
| 権利 | ||||||
| 権利情報 | 日本機械学会 | |||||
| 権利 | ||||||
| 権利情報 | 本文データは学会の許諾に基づくCiNiiからの複製である | |||||
| 著者版フラグ | ||||||
| 値 | publisher | |||||
| 異版である | ||||||
| 関連タイプ | isVersionOf | |||||
| 識別子タイプ | URI | |||||
| 関連識別子 | http://ci.nii.ac.jp/naid/110002380576 | |||||
