WEKO3
アイテム
PET薄膜を用いた研削表面間の接触圧力分布測定
http://hdl.handle.net/10191/5808
http://hdl.handle.net/10191/5808f69bd915-223b-454e-9c37-bfc49e0c9898
| 名前 / ファイル | ライセンス | アクション |
|---|---|---|
9_0106.pdf (838.8 kB)
|
|
| Item type | 学術雑誌論文 / Journal Article(1) | |||||
|---|---|---|---|---|---|---|
| 公開日 | 2008-04-08 | |||||
| タイトル | ||||||
| タイトル | PET薄膜を用いた研削表面間の接触圧力分布測定 | |||||
| タイトル | ||||||
| タイトル | PET薄膜を用いた研削表面間の接触圧力分布測定 | |||||
| 言語 | en | |||||
| 言語 | ||||||
| 言語 | jpn | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Tribology | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | PET | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Contact Pressure | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Ground Surface | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Asperity | |||||
| キーワード | ||||||
| 主題Scheme | Other | |||||
| 主題 | Real Contact | |||||
| 資源タイプ | ||||||
| 資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
| 資源タイプ | journal article | |||||
| その他のタイトル | ||||||
| その他のタイトル | Measurements of Distributions of Contact Pressures between Ground Surfaces using PET Films | |||||
| 著者 |
新田, 勇
× 新田, 勇× 如澤, 健 |
|||||
| 著者別名 | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 58 | |||||
| 姓名 | Nitta, Isami | |||||
| 著者別名 | ||||||
| 識別子Scheme | WEKO | |||||
| 識別子 | 45877 | |||||
| 姓名 | Jozawa, Takeshi | |||||
| 抄録 | ||||||
| 内容記述タイプ | Abstract | |||||
| 内容記述 | A new method of measuring a distribution of contact pressures between ground surfaces using a thin PET film with 0.9 μm thickness has been developed. Punch specimens were made of carbon steel S 45 C and its ends were ground. The PET film was inserted between ground surfaces of the punch specimens and pressed at a given pressure for one minute. The PET film was indented by surface asperities on the ground surfaces at real contact points. Thus if the relationship between the areas of the indented parts and the applied pressures were knwon, the contact pressures could be determined by measuring the indented areas of the PET film. The indented areas of the PET films were proportinal to the applied pressures in the range of 0 to 300 MPa. The indented areas were measured automatically with image processing through an optical microscope which was modified so that its stage was controlled by a microcomputer. The apparent contact area was divided into many portions with areas of about 0.017 mm^2 and the contact pressure was determined in each portion. The measured distributions of contact pressures for circular and square punches were compared with the calculated ones. They were in relatively good agreement with each other. | |||||
| 書誌情報 |
日本機械学会論文集. C編 en : 日本機械学会論文集. C編 巻 60, 号 579, p. 3970-3977, 発行日 1994-11 |
|||||
| 出版者 | ||||||
| 出版者 | 日本機械学会 | |||||
| ISSN | ||||||
| 収録物識別子タイプ | ISSN | |||||
| 収録物識別子 | 03875024 | |||||
| 書誌レコードID | ||||||
| 収録物識別子タイプ | NCID | |||||
| 収録物識別子 | AN00187463 | |||||
| 権利 | ||||||
| 権利情報 | 日本機械学会 | |||||
| 権利 | ||||||
| 権利情報 | 本文データは学会の許諾に基づくCiNiiからの複製である | |||||
| 著者版フラグ | ||||||
| 値 | publisher | |||||
| 異版である | ||||||
| 関連タイプ | isVersionOf | |||||
| 識別子タイプ | URI | |||||
| 関連識別子 | http://ci.nii.ac.jp/naid/110002381315 | |||||
