@article{oai:niigata-u.repo.nii.ac.jp:00003875,
 author = {川崎, 一正 and 田村, 久司},
 issue = {597},
 journal = {日本機械学会論文集. C編, 日本機械学会論文集. C編},
 month = {Nov},
 note = {A method for the detection of the errors in hypoid gear cutting is proposed. The coordinates of the points on the gear tooth surface are measured using a coordinate measuring machine and a geometrical gear tooth surface is estimated by the method of least squares so that the surface can fit the data of coordinate measurements. This geometrical surface is implicitly defined from machine settings on a Gleason hypoid generator and the surface usually differs from the designed surface because of machine setting errors. The purpose of this method is to detect the machine setting errors. The coordinates of the points on the gear tooth surface were measured and the errors were detected using this method. Furthermore, the detected errors were compensated and corrective cutting was carried out. As a result, a gear tooth surface close to the designed one could be obtained. The validity was confirmed by observing the contact pattern for a pair of gears.},
 pages = {3513--3519},
 title = {ハイポイドギヤの歯切り誤差検出法},
 volume = {59},
 year = {1993}
}