@article{oai:niigata-u.repo.nii.ac.jp:00003860,
 author = {田村, 久司 and 川崎, 一正 and 佐藤, 真人},
 issue = {589},
 journal = {日本機械学会論文集. C編, 日本機械学会論文集. C編},
 month = {Sep},
 note = {In this study, an ordinary complementary crown gear generates both an actual spiral bevel gear and an imaginary spiral bevel gear whose pitch cone angle is 80^o～87^o. The tooth surface of the imaginary bevel gear is replaced by a simple conical surface. The imaginary gear with the conical tooth surface is designated as a quasi-complementary crown gear and is used as a tool gear to generate the pinion. The quasi-complementary crown gear produces a tooth surface modification. As a result, the engagement of the gears is a point contact with a negligibly small non-conjugate. The complementary crown gear and the quasi-complementary crown gear each generate both sides of a tooth space of the work gear simultaneously because the cutter blades forming a tooth of each crown gear are widely spread by an adequate amount. The conditions which satisfy this duplex spread-blade method relating to both the complementary and quasi-complementary crown gears are shown in this PaPer.},
 pages = {3709--3715},
 title = {準仮想冠歯車を用いたこう配歯曲がり歯傘歯車のDuplex歯切法},
 volume = {61},
 year = {1995}
}