@article{oai:niigata-u.repo.nii.ac.jp:00003679,
 author = {鈴木, 賢治 and 松本, 一秀 and 久保, 貴博 and 町屋, 修太郎 and 田中, 啓介 and 秋庭, 義明},
 issue = {711},
 journal = {日本機械学会論文集. A編, 日本機械学会論文集. A編},
 month = {Nov},
 note = {The distribution of the residual stress in the thermal barrier coating, which was made by an electron beam-physical vapor deposition (EB-PVD) method, was determined using X-ray stress measurements. As the bond coating, NiCoCrAlY was low-pressure plasma sprayed on the substrate of austenitic stainless steel. The 8 mass% Y_2O_3-ZrO_2 was coated on the bond coating using the EB-PVD method as the top coating. The top coating had the preferred orientation with the <111> axis direction perpendicular to the coating plane. The distribution of the in-plane residual stress in the top coating was measured using laboratory X-rays. The value of the in plane stresses was determined by the sin^2 ψ method after the separation of the 133 and 331 diffractions. The distribution of the out-of-plane strain in the top coating was measured using the strain scanning method with hard synchrotron X-rays. The out-of-plane strain was obtained from the 333 diffraction which had strong intensity due to the preferred orientation. The measured value of the in-plane stress in the top coating was a large compression, and steeply decreased near the interface between the top and the bond coating. The distribution of the out-of-plane stress showed a compression, and its magnitude was smaller than that of the in-plane stress.},
 pages = {1523--1529},
 title = {高エネルギー放射光によるEB-PVD遮熱コーティングの残留応力分布の解析},
 volume = {71},
 year = {2005}
}