@article{oai:niigata-u.repo.nii.ac.jp:00003617, author = {鹿妻, 洋之 and 齊藤, 義明 and 宮川, 道夫 and 堀, 潤一}, issue = {4}, journal = {日本ハイパーサーミア学会誌, 日本ハイパーサーミア学会誌}, month = {Dec}, note = {リエントラント型空洞共振器アプリケータは, 2つのリエントラントを内部に持つ空洞共振器によって構成される癌温熱治療用アプリケータである.本アプリケータによれば, 被加温体の中心に円柱状の高温領域を発生させ得ることが数値解析によって確認されている.本論文では, 実際に加温実験を行い, 直径24cm, 厚さ12cmまでの円筒型の均質ファントムに対して中心部が集中的に加温されることを示した.また, 集中加温を実現するためには, ファントムの厚さをリエントラント間隔の40%程度に保ち, 電界集中具の直径をファントムの厚さの1.5倍程度に大きくし, かつ高周波電力増幅器と空洞共振器の結合を臨界状態にする必要があることを示した., A "reentrant resonant-cavity applicator" is a hyperthermic system having a resonant cavity, inside of which are two reentrants. In simulated heating test, the applicator produced a cylinder-shaped area of high temperature in the center of a heated object. This paper describes the heating characteristics of the applicator, in order to appraise its ability to produce concentrated heating for cylindrical-shaped phantoms of 24 cm diameter and 12 cm height. In experiments using these phantoms, concentrated heating characteristics were produced, which are superior to RF capacitive heating. In order to perform concentrated heating, 1) the height of the phantoms must be maintained at less than about 40% of the distance between the two reentrants, 2) the diameter of the plates concentrating the electric field must be about 1.5 times larger than the height of the phantom, 3) the impedance between the applicator and a power supply must be matched.}, pages = {401--409}, title = {リエントラント型空洞共振器アプリケータの加温特性 : 小規模ファントムを用いた実験的考察}, volume = {12}, year = {1996} }