@inproceedings{oai:niigata-u.repo.nii.ac.jp:00031280,
 author = {川崎, 一正 and 田村, 久司},
 book = {通常総会講演会講演論文集, 通常総会講演会講演論文集},
 month = {},
 note = {A method of the detection of errors in hypoid gear cutting is proposed. The coordinates of the points on the gear tooth surfaces are measured using a three-coordinate measuring machine and the surfaces are estimated by the method of least squares so that the surfaces can fit to the data of coordinate measurements. The surfaces differ from the designed surfaces because of machine setting errors on a Gleason hypoid generator. The purpose of this method is to find the machine setting errors. The coordinates of the points on the gear tooth surfaces were practically measured and the errors were found by this method. Furthermore, the errors were compensated and the corrective cutting was carried out. As a result, the surfaces closing to the designed surfaces could be obtained. The validity was confirmed by the observation of the contact pattern for gear pair.},
 pages = {476--478},
 publisher = {日本機械学会},
 title = {ハイポイドギヤの歯切り誤差検出法},
 volume = {930-9},
 year = {1993}
}