2024-03-28T22:32:37Z
https://niigata-u.repo.nii.ac.jp/oai
oai:niigata-u.repo.nii.ac.jp:00003877
2022-12-15T03:36:54Z
423:424:425
453:454
A Method for Cutting Hypoid Gears : Determination of Machine Settings
ハイポイドギヤの歯切法に関する研究(歯切設計法)
ハイポイドギヤの歯切法に関する研究(歯切設計法)
川崎, 一正
45924
田村, 久司
45925
Gear
Design
Cutting
Hypoid Gear
Tooth Bearing
Gleason Hypoid Generator
Undercut
Profile Modification
Crowning
When hypoid gears are used in automobile rear axles, the gear axes are relatively displaced. The relative displacement of gear axes causes gear noise. In order to reduce gear noise, it is necessary to modify the tooth surfaces of the gears. In this paper, a method for cutting hypoid gears with modified tooth surfaces is proposed. In this method, the nongenerated ring gear is cut by a cutter in which each cutting edge is modified from the usual straight line to a circular arc with a large radius of curvature and the pinion is generated by a cutter with straight cutting edges as usual. Although an irregular tooth surface which does not mesh with the mating surface is apt to appear on the pinion tooth flank during manufacturing, with this method, the surface does not appear. The main procedure of this method is the determination of the machine settings for the Gleason hypoid generator. In order to confirm the validity of the method, a pair of hypoid gears was designed and manufactured using this method. As a result, the tooth bearing was acceptable and the appearance of the irregular tooth surface could be avoided.
journal article
日本機械学会
1993-08
application/pdf
日本機械学会論文集. C編
564
59
2544
2551
日本機械学会論文集. C編
AN00187463
03875024
https://niigata-u.repo.nii.ac.jp/record/3877/files/9_0098.pdf
jpn
http://ci.nii.ac.jp/naid/110002392919
日本機械学会
本文データは学会の許諾に基づくCiNiiからの複製である