WEKO3
アイテム
拡散接合の接合強度と接合面積に及ぼすSUS304突起頂角の影響
http://hdl.handle.net/10191/1774
http://hdl.handle.net/10191/177407d1a827-c99b-4dd7-97de-341f38899525
名前 / ファイル | ライセンス | アクション |
---|---|---|
4_0008.pdf (794.0 kB)
|
|
Item type | 学術雑誌論文 / Journal Article(1) | |||||
---|---|---|---|---|---|---|
公開日 | 2007-05-10 | |||||
タイトル | ||||||
タイトル | 拡散接合の接合強度と接合面積に及ぼすSUS304突起頂角の影響 | |||||
タイトル | ||||||
タイトル | 拡散接合の接合強度と接合面積に及ぼすSUS304突起頂角の影響 | |||||
言語 | en | |||||
言語 | ||||||
言語 | jpn | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Diffusion Bonding | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Stainless Steel | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Asperity Angle | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Wedge | |||||
キーワード | ||||||
主題Scheme | Other | |||||
主題 | Strain | |||||
資源タイプ | ||||||
資源タイプ識別子 | http://purl.org/coar/resource_type/c_6501 | |||||
資源タイプ | journal article | |||||
その他のタイトル | ||||||
その他のタイトル | The Effects of Asperity Angle of SUS304 on the Bonding Strength and Bonded Area of Diffusion Bonding | |||||
著者 |
新田, 勇
× 新田, 勇× 平田, 直樹× 石橋, 達弥× 下田, 茂 |
|||||
著者別名 | ||||||
識別子Scheme | WEKO | |||||
識別子 | 58 | |||||
姓名 | Nitta, Isami | |||||
著者別名 | ||||||
識別子Scheme | WEKO | |||||
識別子 | 46131 | |||||
姓名 | Hirata, Naoki | |||||
著者別名 | ||||||
識別子Scheme | WEKO | |||||
識別子 | 46132 | |||||
姓名 | Ishibashi, Tatsuya | |||||
著者別名 | ||||||
識別子Scheme | WEKO | |||||
識別子 | 46133 | |||||
姓名 | Shimoda, Shigeru | |||||
抄録 | ||||||
内容記述タイプ | Abstract | |||||
内容記述 | Experiments of diffusion bonding were carried out at elevated temperatures for 30 min in a vacuum. Strengths of as-bonded specimens (without further machining) were measured by 4 points bend test. Specimens to be bonded have asperities in wedge shape on the upper ends. The asperity angles were 100°, 120°, 140° and 160°. The surfaces to be bonded were brought into contact with the redges on the specimen perpendicular to those on another specimen. The bonding strengths of the asperity angles of 100°and 160°were higher than those of asperity angles of 120° and 140°. The bonded areas were almost equal at from 100° to 140° and the largest boded area was observed at 160°. The bonding strength became low when the bonding pressure was high at the end of the bonding process. The bonding strength of 35% prestrained specimens were almost equal to those of not prestrained specimens. The bonded areas of 35% prestrained specimens were, however, smaller than those of not prestrained specimens. | |||||
書誌情報 |
日本機械学会論文集. C編 en : 日本機械学会論文集. C編 巻 55, 号 515, p. 1814-1819, 発行日 1989-07 |
|||||
出版者 | ||||||
出版者 | 日本機械学会 | |||||
ISSN | ||||||
収録物識別子タイプ | ISSN | |||||
収録物識別子 | 03875024 | |||||
書誌レコードID | ||||||
収録物識別子タイプ | NCID | |||||
収録物識別子 | AN00187463 | |||||
著者版フラグ | ||||||
値 | publisher |